Tips For Replacing a Window Handle
Switching your window handle is a simple project that can be completed from the at-home comforts of your home. Follow these handy tips for a smooth operation and great look.
Remove the screw covers from your uPVC handle to reveal the screws. Take a measurement of the spindle to be sure you're getting the correct size replacement.
1. Take a measurement of the Spindle Length
It is crucial to have the right size spindle when replacing windows handles. It can affect the tightness or looseness of the handle as well as whether the handle will lock properly into the frame of the window. The spindle is a steel shaft that connects the handle to the lock on the frame of the window. The spindle can be found in the standard 8mm cross-section for industry or older 9mm versions. The modern industry standard is 8mm however this wasn't always the case. When purchasing a new handle, it's essential to check the dimensions.
Remove the handle. This is done by turning the handle in the open position and unscrewing two screws that secure the handle (which are often hidden behind plastic caps that must be removed). After removing the handle, measure from the base of the handle until the end of the spindle. This will provide you with the measurements required to purchase a replacement.
There are plenty of choices when it comes to selecting a new window handle, from sleek chrome that blends in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or even the more classic Tudor cottages with curled monkey tail locks! The options are endless but the most important thing is to choose a style that suits your home.
Espag handles are usually used to uPVC window frames and are always the same size with a 43mm center. Cockspur handles range from 58mm to 62mm but there are replacements for both sizes. Cadenza window handles have distinct dimensions due to their angle blade that operates the multi-point lock mechanism within the window.
Another factor when choosing the best window handle is knowing what hand you need to use, which is defined by what hand you use to open the door. Inline Espag handles can be used with either left or right-handed windows. Cranked window handles are handed and are only used on windows that open in only one direction.
2. Remove the Handle
A window handle that falls out can be a hassle, regardless of whether the handle is damaged or worn out. The good part is that replacing the uPVC window handle is a simple task that you can complete yourself. All you need are some basic tools and a bit of time to complete the task.
You will need to first open the window, and then ensure that it's not locked. Then, you need to remove the screws that hold the handle in place. Once the screw caps are removed then you'll be able to take off the handle.
The handle is attached to a spindle inside the window frame. Depending on the kind the handle is held in place either with a screw or pin. The most common handles are the inline Espagnolette and the cockspur handles. Both these types of handles are used on casement windows, as well as windows made of aluminium. They can be locked using a key to prevent unauthorised opening of the window from outside or by locking them by turning the handle clockwise.
To remove the handle, you will need to use an screwdriver with a flat blade in order to release the clip holding the handle in place. After this is released, the handle will slide off the spindle. Once the handle that was previously used is removed, you'll need measure the spindle length and make sure that your new handle will fit.
Once you have determined the proper size for the handle, screw it into the correct position. It is crucial to make sure that the handle is securely fastened and rotates in the correct direction (clockwise in the case of an open or counterclockwise if the handle is closed). It is also crucial to make sure that it has not been installed upside down.
Replace the screw caps. Once you have done this then you can test the handle to ensure that it works properly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked one and back.
3. Remove the Screws
A uPVC handle is an essential part of any house and is the first thing to show signs of wear or damage. This can be caused by natural causes or from regular use, or intentional damage caused by criminals who may wish to open a locked window and gain access to your property. However, a simple repair is a simple solution and prevent the issue from happening again.
uPVC handles could also be difficult to remove when the locking mechanisms aren't working correctly. It's often possible to solve the issue by replacing the multipoint locking mechanism rather than the entire handle. This could save you money.
After you've removed the old handle, you'll have to take off the screws that were holding it in place. They're usually on the inside of the handle base. You may need to use a screwdriver to accomplish this and it's essential that you don't over tighten as this can cause the handle to loosen.
You will then need to find the fixing screws or pins that hold the new handle in place. These are usually located on the inside of the base of the handle. You'll require a screwdriver to take them off. After they've been removed, you'll be required to replace the caps on the screws should you choose to do so, and then test the new handle to ensure it's working correctly.
When you're ready for installing the new handle, simply line up the spindle with the cutout in the window mechanism and screw it into the right position. If you wish to replace the screw covers, make sure the handle is in a position that is open and that the screws are securely fixed. After this is done, you're all done and you can enjoy your newly replaced window handle. We hope this will allow you avoid the need for expensive window and door replacements in the future. If you would like more assistance with this or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the new handle
The procedure of replacing a damaged window handle or updating it is simple and can be completed within only a few simple steps. The most important thing is to identify the type of handle, determine its spindle, and determine what tools you'll need to complete the job. Always consider security when working with windows and tools. Make sure you follow the steps and ensure that you have the right handle to use.
To begin, locate the screws that hold your window handle. Take them off while firmly holding the handle to stop it from falling and causing injury. Once the screws have been removed, you can put them in a safe location to be replaced later.
After the handle that was used previously is removed, you are now able to begin to install your new handle. Learn Alot more is crucial that the handle fits perfectly to ensure that it works properly and locks the window in place. Then you need to slide the square metal bar on the handle into the hole for the window mechanism.
The final step is to replace the caps on the screws and test the handle to ensure that it is working. If you aren't satisfied with the results or if your window doesn't open and close as it should then the next step is to contact our experts who will be able to assist.
Most UK homes are equipped with uPVC Windows. This means that a lot of them will need to be changed at some point because of wear and tear or breakage. The process is relatively straightforward and can be carried out by anyone with a little knowledge of DIY. It is important that the handle you use is in line with the style and size of your window. If you're unsure about what type of handle you require, please reach out to our team, who will be able to provide you with the possibilities available.